A filing system that survives growth: a three-level address, one numbering direction, and a separation between current work and the archive. Includes a worked numbering example.
Selection Guides | 2026-09-03 | Luoyang Guanting Office Furniture Co., Ltd.
Storage problems in pathology archives are rarely caused by too few cabinets. More often the cabinets are adequate but the filing system is not: two numbering directions in one room, drawers labelled by year only, and a current-work zone that grows until it swallows the space reserved for the archive.
Every block and slide needs a physical address that a colleague can follow without asking. In practice that means three levels:
The address should be written on the cabinet, in the paper ledger and in the laboratory information system in the same format. When the three disagree, the physical cabinet always wins and the database quietly rots.
The single most common failure is numbering direction. If one group counts drawers from the top and the next counts from the bottom, “drawer 3” means two different places in the same room. Decide the direction at handover, write it on a card inside the first drawer of each group, and stick to it when new groups arrive.
Hospitals with high case volumes usually keep two zones:
| Zone | Contents | Cabinet type | Retrieval frequency |
|---|---|---|---|
| Current work | This year's blocks and slides, slides still drying | Single section, dense drawers, bench height | Several times a day |
| Archive | Previous years, complete case series | Four-section groups in a wall | Occasionally, by request |
| Long-term / off-site | Older material, compact shelving | Mobile shelving or high-density sections | Rarely |
Without that separation, the current year expands into whatever space is free and the archive loses its structure. A single section of 5 or 6 drawers beside the bench is usually enough for current work, and it can be replaced or moved when the year rolls over.
A department filing 9,000 blocks and 30,000 slides a year, keeping 15 years, needs roughly 135,000 cassette positions and 450,000 slide positions. At 500 cassettes per drawer and 800 slides per drawer that is 270 block drawers and 563 slide drawers. In four-section groups of 24 block drawers and 36 slide drawers, that is about 11 block groups and 16 slide groups — a wall roughly 28 metres long, which is why archive rooms are planned around walls rather than around cabinets.
Two consequences follow. First, the filing system has to scale: adding a group every two years means the numbering convention must leave room for expansion. Second, the drying zone should not be in the archive room, because wet slides need bench adjacency, not archive adjacency.
Cards in transparent holders last longer than adhesive labels, and they can be replaced when a drawer is reassigned. Adhesive labels on drawer fronts should be avoided altogether if the room is cleaned with alcohol-based disinfectants. A label holder plus a printed card costs very little and is the difference between a working archive and a room full of unlabelled drawers.
Related reading: drawer configuration, and the slide cabinet range for drawer counts.
Need a cabinet for a specific room? Call +86 139 3881 2326 or send the dimensions — we will return a section and drawer plan.
Send your room dimensions and archive volume — we will return a drawer layout, section count and quotation.