Short answers to the questions that come up in every cabinet project, from drawer capacity to mould prevention.
Most stiff drawers are caused by dirt in the runner, a cabinet out of level, or material jammed behind the drawer — in that order. A five-minute diagnosis before calling for parts.
The two standard widths differ in per-drawer capacity, footprint and how a wall run reads. How to choose by room geometry first and drawer capacity second.
Keep the drawers opened every day below 1.6 m. How section heights add up, where the reach limit falls for different users, and when a taller stack is still the right answer.
Mould in an archive is a humidity problem before it is a cabinet problem. Target relative humidity, keep the cabinet off the floor, dry slides before filing and know what to do with affected material.
It depends on whether the archive room itself is controlled. Cabinet locks, per-drawer locks and no locks each suit a different access model — and the choice belongs in the specification.
Yes, if widths, section heights and bases match. What to check before stacking two cabinet families, and why stacking changes the height of the drawers people use daily.
Slide drawers hold roughly 300 to 900 slides, set by slot count rather than rows. How slot pitch and drawer width decide the figure, and why thin drawers are not a downgrade.
Drawer capacity runs from about 400 to 700 cassettes depending on cassette thickness, divider spacing and drawer depth. Here is how the figure is calculated and what changes it.
Send your room dimensions and archive volume — we will return a drawer layout, section count and quotation.