Pathology storage cabinets · paraffin blocks, microscope slides & archives
Luoyang, Henan, China Sales: +86 139 3881 2326

How Many Cassettes Fit in One Cabinet Drawer?

Drawer capacity runs from about 400 to 700 cassettes depending on cassette thickness, divider spacing and drawer depth. Here is how the figure is calculated and what changes it.

FAQ & Troubleshooting | 2026-09-11 | Luoyang Guanting Office Furniture Co., Ltd.

A paraffin block drawer typically holds between 400 and 700 cassettes. The spread is wide because capacity depends on three things that vary between laboratories: cassette thickness, divider spacing and drawer depth.

How the figure is calculated

Capacity is the number of rows multiplied by the number of cassettes per row:

  • Rows are set by divider count, which follows drawer width.
  • Cassettes per row is the drawer depth divided by cassette thickness, less a small allowance for movement.

A 480 mm deep drawer holding 6 mm cassettes takes roughly 70 cassettes per row in theory; in practice manufacturers rate 45–55 per row to leave retrieval clearance. With 10–12 rows, that lands at 450–650 cassettes per drawer — which is where the catalogue figures come from.

What changes the number

FactorEffect on capacity
Cassette thickness (5 mm vs 8 mm)Thicker cassettes cut capacity by roughly 20–30%
Divider spacing (27 mm vs 32 mm)Narrower spacing adds rows; fewer if the cassette will not fit
Drawer depthShallower drawers hold fewer per row
Mixed cassette sizes in one rowReduces usable capacity because the row cannot be packed fully

Ask for the assumption, not the headline

When a quotation says “500 cassettes per drawer”, the useful follow-up question is what cassette thickness that assumes. A supplier who states the assumption can be compared fairly with another; one who cannot cannot be compared at all.

Our own data sheets state capacity together with drawer count and section size, so the total for a group can be recalculated: 24 drawers × 500 cassettes gives about 12,000 cassettes for a four-section group.

Practical checks at delivery

  1. Load one drawer with your own cassettes and count what actually fits without forcing.
  2. Confirm the drawer still closes flush and pulls smoothly at that load.
  3. Check that the row does not lean when the drawer is three-quarters open.

Details on divider spacing are in the drawer configuration guide; model capacities are listed under paraffin block cabinets.

Frequently asked questions

How many cassettes fit in a 5-drawer block cabinet?

With 500 cassettes per drawer, a single 5-drawer section holds about 2,500. A four-section group of the same drawer count holds about 10,000, and the largest 6-drawer four-section groups reach roughly 16,400 cassettes at 680 per drawer.

Does a deeper drawer always hold more cassettes?

Usually yes, because more cassettes fit front to back. The gain is smaller than it looks: a 20% deeper drawer adds roughly 15% capacity, and it costs floor space in the room and drawer travel for the user.

Can I mix cassette sizes in one cabinet?

You can mix them across drawers, but not within a row. Thin and thick cassettes in the same row make it lean and the drawer binds. Set divider spacing for the most common size and keep deep cassettes in their own drawers.

Need a cabinet for a specific room? Call +86 139 3881 2326 or send the dimensions — we will return a section and drawer plan.

Need cabinets sized to your archive room?

Send your room dimensions and archive volume — we will return a drawer layout, section count and quotation.