24 articles in total, 10 per page.
It depends on whether the archive room itself is controlled. Cabinet locks, per-drawer locks and no locks each suit a different access model — and the choice belongs in the specification.
Yes, if widths, section heights and bases match. What to check before stacking two cabinet families, and why stacking changes the height of the drawers people use daily.
Slide drawers hold roughly 300 to 900 slides, set by slot count rather than rows. How slot pitch and drawer width decide the figure, and why thin drawers are not a downgrade.
Drawer capacity runs from about 400 to 700 cassettes depending on cassette thickness, divider spacing and drawer depth. Here is how the figure is calculated and what changes it.
Single sections let an archive grow in steps without changing footprint or numbering. Where modular wins, where a fixed run is simpler, and how to phase a purchase without creating colour or finish mismatches.
Wet slides should travel as little as possible. Why drying cabinets work beside the bench, how many drawers a department needs, and what goes wrong when drying is pushed into the archive room.
The dimensions that decide a usable archive room: wall runs, aisle width for full drawer extension, ceiling clearance and where the drying zone belongs.
How divider spacing and slot count are set, why they cannot be swapped between blocks and slides, and what to send a supplier so the drawer arrives ready for your format.
The arithmetic behind a cabinet order: annual volume, retention, drawer capacity and section count — with a worked example for blocks and one for slides.
How to raise capacity without moving walls: thin-profile sections, taller section stacks, dense drawer counts and compact shelving, with the trade-off each one brings.
Send your room dimensions and archive volume — we will return a drawer layout, section count and quotation.